Bespoke minimalist windows for villas in Marbella.
Frameless windows, minimal timber profiles and slim-line steel windows. We define every system around the architecture, the orientation, the views and the way the house is lived in.
At a glance
Minimalist and frameless windows in Marbella, in brief.
Minimalist windows reduce the visible frame to a minimum, or hide it entirely in the floor, ceiling and walls, so the glass fills the opening. Royal Design Marbella specifies, supplies and installs them in aluminium, timber and steel for villas in Marbella, Benahavís, Estepona, Sotogrande and across the Costa del Sol.
- MaterialsAluminium · Timber · Timber-aluminium · Steel
- SystemsSky-Frame (exclusive distribution) · Carminati · Capoferri · MHB
- OpeningsFixed · Sliding · Lift-and-slide · Side-hung · Tilt-and-turn · Pivot
- GlassDouble or triple glazing · Solar control · Acoustic · Low-iron
- Own lineRoyal Glassea: interior steel and glass doors, partitions and mirrors, made to measure
- ServiceSpecification, supply and installation, coordinated with your architect
A minimalist window frames the view. It should never interrupt it.
At Royal Design Marbella, every window is defined by the opening, the orientation and the relationship between the interior and the landscape. We do not start from a catalogue: we assess the profile section, the glass, the opening type, the finish and how present the frame should be before choosing the system.
We work with four European manufacturers that approach minimalism through different materials: Sky-Frame in aluminium, Carminati and Capoferri in timber, and MHB in steel. We coordinate specification and installation in Marbella, Mijas Costa, Benahavís, Estepona, Sotogrande and across the Costa del Sol.
What sets a minimalist window apart from a conventional window.
In a conventional window, the frame takes up a large part of the opening. In a minimalist window, the profile is reduced, concealed in the floor, ceiling or walls, or carried by the glass itself, so that the view and the light take centre stage.
- 0101
More glass and less frame
The visible profile is reduced to a minimum or concealed in the building. The result is more glazed surface in the same opening, more natural light and a clean reading of the façade, from inside and out.
- 0202
Continuity between inside and outside
Large fixed or sliding panels, flush thresholds and well-resolved junctions allow the living room, terrace and landscape to read as one space. On the Costa del Sol, that continuity is part of how the house is lived in.
- 0303
Performance without bulky profiles
Today's systems combine minimal profiles with double or triple glazing, solar-control glass and dedicated thermal solutions. Minimalism does not have to compromise comfort, as long as the system is specified for its orientation and use.
- 0404
Architectural presence
A minimalist window is not added at the end. It sets the rhythm of the façade, the framing of every view and the way the architecture is perceived. That is why it is decided alongside the design, not afterwards.
Every window is defined by the project.
A minimalist window is not just a product choice. It is a decision about material, profile section, opening, orientation and maintenance. Royal Design Marbella reviews every opening and coordinates the right system in aluminium, timber or steel.

Four routes to a minimalist window.
Minimalism can be achieved through different materials. Some projects want the frame to disappear completely, others want the warmth of timber, in its slimmest section or with more presence, and others the character of steel. Each route answers a different kind of architecture.
Sky-Frame is the most minimalist expression of the range. The frame is built into the floor, ceiling and walls so that only the glass remains: large floor-to-ceiling fixed and sliding panels, also in curved or sloped geometries. It is the route when the architecture wants the opening to read as a boundless aperture.
- Integrated frame — profiles concealed in the building for an uninterrupted view
- Classic · Plain · Arc · Slope — systems for different geometries and openings
- Costa del Sol — exclusive distribution and local coordination by Royal Design Marbella
Carminati takes timber to its minimum line. Its Skyline Minimal Frames windows join 37 and 50 mm timber profiles to structural glass, so the timber adds warmth without taking away from the view. For seafront façades, the timber-aluminium version protects the exterior from sun and salt.
- Skyline Minimal Frames — 37 and 50 mm timber profiles bonded to structural glass
- Timber-aluminium — timber inside and an aluminium skin against the Mediterranean climate
- Lift-and-slide doors — track flush with the floor, no step between inside and outside
Capoferri treats timber as architectural joinery. Where Carminati reduces the profile to a minimum, Capoferri lets the timber show and define the proportions of the window, with laminated profiles that can handle large dimensions. It is the route when timber is part of the language of the house.
- Timber with presence — grain, proportion and detail as part of the design
- Large formats — laminated timber profiles for large windows
- Side-hung · sliding · pivot — configurations adapted to each opening
MHB is the steel route. Its windows combine slender profiles with fixed, side-hung, tilt-and-turn and top-hung solutions, so the whole façade reads as a single composition. It suits projects where the profile has an intentional presence and the steel grid is part of the architecture.
- Slender steel profiles — slim lines with architectural presence
- Fixed · side-hung · tilt-and-turn · top-hung — each opening with its own operation
- One language — MHB steel windows and doors consistent across the whole façade
These routes are not interchangeable. Sky-Frame belongs to aluminium and the frame that disappears, Carminati to timber in its slimmest section, Capoferri to timber with architectural presence y MHB to steel windows.
Compare
Aluminium, timber or steel: which minimalist window suits your villa?
The four routes side by side. Each answers a different kind of architecture, so the right choice depends on the opening, the view and how present the frame should be.
| Feature | Sky-FrameAluminium | CarminatiTimber · timber-aluminium | CapoferriLaminated timber | MHB SteelSteel |
|---|---|---|---|---|
| Visible frame | Concealed in floor, ceiling and walls: only the glass remains | Slim 37 or 50 mm timber profiles bonded to structural glass | Timber left visible by design, defining the proportions | Slender steel profiles with an intentional grid |
| Openings | Fixed and sliding, floor to ceiling; curved (Arc) and sloped (Slope) geometries | Fixed and lift-and-slide with a flush floor track | Side-hung, sliding and pivot; large formats | Fixed, side-hung, tilt-and-turn and top-hung |
| Character | Pure transparency: the opening reads as boundless | Warmth with the slimmest timber line | Architectural joinery: grain, proportion and detail | Slim lines with character |
| Best suited to | Contemporary villas where the frame should disappear | Warm interiors that must not lose the view | Houses where timber is part of the architectural language | Façades where the steel grid is part of the design, with matching MHB doors |
| By the sea | Treated aluminium for sun and salt air | Timber-aluminium version protects the exterior | Specified per façade exposure and orientation | Specific steel finishes, reviewed per location |
Sky-Frame
Aluminium
- Visible frame
- Concealed in floor, ceiling and walls: only the glass remains
- Openings
- Fixed and sliding, floor to ceiling; curved (Arc) and sloped (Slope) geometries
- Character
- Pure transparency: the opening reads as boundless
- Best suited to
- Contemporary villas where the frame should disappear
- By the sea
- Treated aluminium for sun and salt air
Carminati
Timber · timber-aluminium
- Visible frame
- Slim 37 or 50 mm timber profiles bonded to structural glass
- Openings
- Fixed and lift-and-slide with a flush floor track
- Character
- Warmth with the slimmest timber line
- Best suited to
- Warm interiors that must not lose the view
- By the sea
- Timber-aluminium version protects the exterior
Capoferri
Laminated timber
- Visible frame
- Timber left visible by design, defining the proportions
- Openings
- Side-hung, sliding and pivot; large formats
- Character
- Architectural joinery: grain, proportion and detail
- Best suited to
- Houses where timber is part of the architectural language
- By the sea
- Specified per façade exposure and orientation
MHB Steel
Steel
- Visible frame
- Slender steel profiles with an intentional grid
- Openings
- Fixed, side-hung, tilt-and-turn and top-hung
- Character
- Slim lines with character
- Best suited to
- Façades where the steel grid is part of the design, with matching MHB doors
- By the sea
- Specific steel finishes, reviewed per location
Not sure which route fits? Send us the drawings and we will recommend one.
Ask for a recommendationOur own line · Royal Glassea
The same slim-line language, carried inside the villa.
Minimalist windows open the house to the view. Royal Glassea, Royal Design Marbella’s own steel and glass line, carries the same slim profiles and proportions inside: doors, partitions, mirrors and bathroom glass, designed, made to measure and installed by our team in Marbella.
Discover Royal Glassea- 01Sliding doorsSteel and glass sliding doors between rooms
- 02Pivot doorsStatement entrances and private areas
- 03Glass partitionsDivide living areas without losing light
- 04Luxury mirrorsBathrooms, dressing rooms and entrances
- 05Shower enclosuresGlass for master bathrooms and wellness
- 06Custom solutionsSpecial steel and glass ideas, project-led
Profile and glass options.
In a minimalist window, the glass fills almost the entire opening, so its specification matters as much as the profile. Orientation, panel size, privacy and thermal and acoustic performance are defined before manufacture.
- Double or triple glazing
Gas-filled cavities and low-e glass keep the interior comfortable with large glazed surfaces. The final build-up depends on the system, the panel size and the exposure of the façade.
Main façades · Large panels - Solar-control glass
Reduces heat gain on south and west elevations without darkening the view. Especially relevant for Costa del Sol villas with large openings towards the sea or the garden.
South and west orientation · Sea views - Laminated safety glass
Made of two or more layers bonded with an interlayer. It adds security, impact protection and stability in large-format panels or on ground floors.
Ground floors · Large formats - Acoustic laminated glass
Includes an acoustic interlayer that reduces outside noise. Useful for villas near roads, urban areas or busy access routes.
Bedrooms · Urban settings - Low-iron glass
Removes the green tint of standard glass in large panels, so the view and the colours of the landscape come through more faithfully.
Floor-to-ceiling panels · Views
Aluminium, timber and steel.
The finish defines how the window is perceived from inside and how the façade reads from outside. It is chosen together with the material, the glass and the project palette, not at the end of the process.
- Anodised or powder-coated aluminium
Natural tones, black, dark bronze or bespoke RAL colours on aluminium systems. Durable against sun and salt air, with a precise profile that is barely visible.
- Natural timber
Different species and tones depending on the system and manufacturer, with finishes that respect the grain. It brings warmth to the interior and works with floors, joinery and furniture.
- Timber-aluminium
Timber on the inside face and aluminium on the outside. It keeps the warmth of timber inside the house with a low-maintenance skin against the Mediterranean climate.
- Black or anthracite powder-coated steel
The most common finish for steel windows. It works with pale stone, white plaster and natural timber, and sets the rhythm of the façade with slim lines.
- Bespoke RAL colour
Lets the finish match a specific palette: a particular grey, a deep green, a warm white or any tone that needs to sit with existing joinery, cladding, the façade or the interior design.
The feasibility of each finish depends on the system, the material, the exposure of the façade and the technical requirements of the project. That is why it is defined together with the profile, the glass and the actual position of each window.
From brief to installation.
Every window needs a clear process before it is manufactured. We start by understanding the openings, the architecture, the orientation and the real site conditions so that the system fits the project from day one.
- 01
Initial consultation and specification
We review the openings, the design intent, the preferred material, the orientation and the performance required. If drawings or elevations already exist, we work from them. If the project is at an early stage, we help define the specification with the owner, architect or interior designer.
- 02
Technical design and system route
We decide whether each opening should be resolved in aluminium, timber or steel, and with which manufacturer. We review dimensions, profile, glass, operation, finishes, junctions with the building and installation conditions before moving forward.
- 03
Manufacture, supply and control
The system is manufactured to the approved specification. With Sky-Frame, Carminati, Capoferri or MHB, we coordinate the right route so that dimensions, finishes, glass and components arrive aligned with the project.
- 04
Installation and final adjustment
We coordinate the on-site phase with the teams involved: subframes, installation sequence, sealing, alignment and adjustment. With a minimalist window, the result depends as much on precise installation as on the system itself.
Clarity before the build avoids problems later. That is why we define the system, dimensions, glass, finishes and junctions with the building before closing the final proposal.
Tell us about your projectOur work in Marbella
Built by our team on the Costa del Sol.
Steel and glass projects from Royal Glassea, our own line, designed and installed in villas, homes and showrooms in Marbella.

Puerto Banús
Eric Kuster showroom
Bespoke steel and glass entrance for the designer’s showroom.

Villa · Marbella
Steel and glass double doors
Light, symmetry and openness between two rooms.

Apartment · Marbella
Black steel grid door
A floor-to-ceiling door that adds character and light.

Home · Marbella
Fluted glass nursery
Soft, diffused light and privacy for a baby room.
Minimalist windows integrated into residential architecture.
A selection of references in aluminium, timber and steel from the systems we specify for villas and residences in Marbella and on the Costa del Sol.
Where we install
Minimalist windows in Marbella, Benahavís, Estepona and Sotogrande.
We work from Marbella across the Costa del Sol. In every area we coordinate the site survey, measurement and installation, and adapt system, glass and finishes to the setting of the home.
Marbella
Golden Mile · Sierra Blanca · Nagüeles
Our base. Minimalist windows for villas and penthouses with views.
San Pedro de Alcántara
Guadalmina · Linda Vista
Homes close to the sea: profiles and finishes specified for salt air.
Nueva Andalucía
Golf Valley · La Quinta
Villa renovations: replacing existing windows with minimal profiles.
Benahavís
La Zagaleta · El Madroñal · Los Flamingos
Hillside villas with wide views: wind, glass weight and site access.
Estepona
New Golden Mile · El Paraíso
Front line: solar-control glass and finishes for sun and salt.
Sotogrande
Marina · La Reserva
Coordination with architects and site teams, with logistics planned from Marbella.
Mijas and Fuengirola
Mijas Costa · La Cala · Calahonda
The same survey, specification and installation process for villas and homes.
Málaga and Benalmádena
Málaga city · Eastern coast
Residential projects coordinated with a prior visit and on-site measurement.
Is your project somewhere else? Tell us where and we will review it.
Discuss my projectFrequently asked questions about minimalist windows.
Useful answers for owners, architects and interior designers considering minimalist or frameless windows for a home in Marbella and on the Costa del Sol.
-
A window in which the visible profile is reduced to a minimum, concealed in the building or carried by the glass itself, so the view and the light take centre stage. It can be made in aluminium, timber or steel, and work as a fixed, sliding, side-hung or tilt-and-turn panel.
-
A “frameless” window is not really without a frame: the frame is hidden in the floor, ceiling and walls so that only the glass is visible. It is the most radical expression of minimalism, as in Sky-Frame systems. In a broader sense, minimalist windows also include systems with very slim but visible profiles, such as Carminati timber windows or MHB steel windows.
-
It depends on the architecture and the effect you are after. Sky-Frame aluminium is the choice when the frame should disappear. Timber brings warmth: Carminati in its slimmest section and Capoferri with more presence and proportion. MHB steel suits a slim-line language with character and a visible grid.
-
Both are Italian companies specialising in timber, but they answer different intentions. Carminati is designed to minimise the profile: its Skyline systems bond 37 and 50 mm timber profiles to structural glass. Capoferri treats timber as architectural joinery, with more presence, laminated profiles for large formats and side-hung, sliding and pivot configurations.
-
Yes. As well as fixed panels, the systems allow large-format sliding doors and side-hung, tilt-and-turn, top-hung or pivot windows. The operation of each opening is defined by ventilation, daily use, terrace access and maintenance.
-
Yes, as long as the system and the finish are specified for that environment. On façades exposed to sun and salt air we consider suitably treated aluminium, timber-aluminium solutions such as Carminati's, or specific finishes on steel. We review this according to the location and orientation of each villa.
-
The systems we specify combine minimal profiles with double or triple glazing, low-e and solar-control glass, and each manufacturer's own thermal solutions. Final performance depends on the chosen configuration, which is why it is defined together with the orientation and the project requirements.
-
Yes. Much of our work is carried out with architects, interior designers and site teams. We can review drawings, elevations, openings, materials, finishes, glass and system before the specification is closed, so the windows match the design intent and reach site with clear technical criteria.
-
Ideally, drawings or elevations with the opening sizes, the project location, the type of home, the preferred material, the opening type, photographs of the space and any aesthetic references. If you do not have all the information yet, we can start from a general description and help you define the next steps.
-
Yes. Royal Glassea is Royal Design Marbella’s own steel and glass line for interior sliding and pivot doors, glass partitions, mirrors and shower enclosures. It uses the same slim-line language as minimalist windows, so the inside of the villa stays consistent with the façade.
Related solutions
Complete the façade with the same language.
Sliding doors
Large glass sliding doors and lift-and-slide systems that open the living room to the terrace.
Pivot doors
Oversized pivot entrance doors in timber, steel or glass, made to measure.
Crittall-style doors
Slim steel-and-glass doors and screens with a fine grid.
Glass partitions
Interior glass walls that divide space without losing light.
For architects
Technical support, drawings and system specification for your projects.
Projects
Built references in interiors and exteriors.
Let's talk about your windows before the system is defined.
Send us drawings or a description of the openings, the location, the orientation and the design intent. Royal Design Marbella will assess whether the project needs aluminium, timber or steel, and advise you on the system and the most suitable next step.